Titan

Titan is our dedicated surround and object based audio solution. Rather than trying to repackage a nearfield monitor for this unique application, Titan was designed from the ground up to serve the needs of modern multipoint formats. Mini, but mighty, with 90×90, true point source coverage angle, ultra rigid extruded aluminum cabinets and our signature Composite Sound Metamodal TX diaphragms, Titan retains all the core Ex Machina DNA, just without the subs. Titan is sold exclusively as a package of four satellites with a mating 2RU amplifier/DSP pack.

Custom SEAS Coaxial Woofer/Tweeter

Bleeding edge Composite Sound Metamodal TeXtreme diaphragms: ultralight, ultra-stiff carbon fabrics with optimized fiber geometries to actively control and suppress resonances.

Mathematically optimal woofer waveguide shape and true point source behavior, for eerily lifelike imaging.

FEA optimized, very low distortion ferrite motor design, with an advanced copper shorting sleeve for very low inductance.

ex machina titan for dolby atmos lunar core

Electronics

Flagship AKM Velvet Sound AK4493/AK5572 based conversion leaves no sonic footprint.

Hypex Ncore amplifiers provide gobs of squeaky clean, efficient power.

5th gen SHARC+ DSP hardware can crunch many, many numbers at once.

Included 4-channel remote AMP/DSP pack takes up only 2RU.

Sealed Extruded Aluminum Cabinets

Ridiculously rigid aluminum extrusion provides arguably the deadest cabinet we have ever offered.

Integral 75x75mm and 100x100mm MIS-D VESA mounting points enable many inexpensive, flexible deployment options.

4-pole SpeakON input allows for remote bi-amping over a single cable.

ex machina dolby atmos titan VESA speaker mounts

DSP

Proprietary, in house calibration code completely flattens frequency, phase and impulse response.

Performance Measurements

Phase Response

Impulse Response

Polar Response

Magnitude

THD Ratio Power Average

Coaxial Angle vs Frequency

SPECIFICATION OVERVIEW:

Linear Frequency Response: +/- 1db 80hz – 30khz (measured at 30cm cal position)

Low Frequency Cutoff: -6db at 58hz

Linear Phase Response: +/- 15° 50hz – 30khz

Max SPL at 1m: 106db

THD+N (94db at cal position): < 0.5% Power Average 100hz – 30khz

Coverage Angle: 90° conical

DOWNLOADS:

USER MANUAL

DRIVER COMPLEMENT

146mm (5.5”) woofer, 25mm (1”) tweeter, Custom SEAS/Ex Machina/Composite Sound Metamodal TX™ coaxial

CROSSOVERS

2khz, digital 8th order, phase corrected

Amplifier Complement

Woofer: Hypex NC122MP – 100W

Tweeter: Hypex NC122MP – 50W, voltage limited

Amplifier Ventilation Requirements

1RU above and below the amplifier pack

DSP/Conversion

A/D Chipsets: AKM 5572EN

D/A Chipsets: AKM AK4493EQ

DSP: 5th Gen SHARC+ AD21565

Input Sensitivity

8vrms to full scale (default configuration)
2vrms to full scale (optional high gain configuration)

Mass & Dimensions

165mm H x 165mm W x 165mm D (6.5” x 6.5” x 6.5”)

5.5kg (12lbs)

2RU Amplifier/DSP Pack – 6kg (13lbs)

TESTIMONIALS

It’s the confidence I get from finally being able to trust my own taste that makes these speakers great. Music is a way composers, engineers, and most importantly listeners communicate and it’s done in such a personal way, the most valuable thing you can do for yourself and your audience is to communicate with conviction. Quasars give me that power.

Richie Beretta

Artist, Producer, Engineer

Didn’t realize what I have been missing! After multiple mixes, Pulsars boosted my confidence, I was cranking them out so much faster. It was making mixing so much fun. I submitted some mixes I re-did with Pulsars, and clients were blown away by the differences. I will forever be a proud owner of these.

Joshua Young

Studio Owner, Engineer

If you’re struggling with translation, this will end that battle. The sound staging is insanely hyper accurate. What you hear on these monitors, you will hear on literally any system.

Ryan Harvey

Engineer, Producer

I can hear exactly what I need to do to improve my sound… Quasars are a major tool that help me accomplish this. They are the best thing I’ve bought for my studio in a decade.

Justin Melland

Film Composer

Quasars have become my most valued and crucial piece of equipment. They give me total confidence in knowing how tracking and mixing sessions will translate outside of the room… They provide clarity, transparency, and inspiration.

James Meslin

Recording Engineer, Mixer, Producer

The mid tweet coaxial on these monitors presents a midrange detail like I’ve never heard before. These speakers are far from fatiguing while presenting a pristine midrange and transient response. I’m truly over the moon.

ALEX E

Music Producer, Mixing Engineer

Over the years, I have worked with a number of very good speakers in many studios but the Ex Machina Pulsar takes monitoring to another level. These are truthful tools that you can definitely rely on.

Patrick Derivaz

Bass Player, Composer, Engineer, Producer

Everything translated well and felt balanced, the low end was amazing, I don’t need a sub anymore ! I find that I can work at low volume and hear every detail and also listen loud without fatiguing… The stereo image and center are really defined, I honestly can’t find anything that I don’t like.

Manon Grandjean

Recording, Mixing, Mastering Engineer

The Pulsars have been truly game changing for me. They are super accurate, revealing, and the transient detail is incredible which has made the mixing process much more efficient and allowed for more confident decision making. I couldn’t be more happy with them.

Ryan Leitru

Producer, Songwriter, Mixer

EXPLORE TITAN IN OUR SHOP

USA – BUY TITAN NOW INTERNATIONAL – FIND A DEALER REQUEST DEMO